LEAK & SLAB.

Emergency leak detection in Canton, GA, before the wall tells you.

Finding a hidden leak in a slab-founded Cherokee County home is a matter of listening and pressure, not guesswork and demolition.

Call (770) 764-0886 Emergency? Call 24/7

What we actually do.

Locate first, open second.

Most of the leaks we chase in Canton never drip where anyone can see them. They run inside a wall cavity, under a slab, or along a supply line buried in red clay. The first sign is a water bill that climbed for no reason, a warm patch on a floor, or the sound of water moving when every tap is off. By the time a stain appears on the ceiling, the leak has usually been running for weeks.

The city and the county both treat Etowah River surface water and add polyphosphate specifically to slow scaling and corrosion inside the pipes. That helps, but it does not stop a pinhole in aging copper or a fitting that was rushed during one of the subdivision booms. Our job is to find exactly where the water is escaping and mark it, so the repair is a small opening rather than a guess that tears out half a room.

Wet tile floor from slab water leak, leak detection in Canton, GA — Wet tile floor slab water leak is exactly the kind of thing that separates a quick visit from a callback before the fixture goes back together.

Worker cutting slab to repair leak, leak detection in Canton, GA — A clean cut near worker cutting slab repair leak here is what makes the new coupling fit without forcing it.

How we find it.

The meter, the pressure, then the exact spot.

Detection starts with the meter and a pressure test. If the meter creeps with the house shut down, water is leaving the system somewhere, and the pressure it holds tells us whether we are looking at the supply side or a fixture. From there we narrow it with acoustic listening equipment and, where the line runs under concrete, thermal reading of the floor, since a hot-water slab leak warms the surface above it long before it soaks through.

That sequence matters most on the thousands of homes built across Cherokee County in the last twenty years on concrete slabs. A supply line nicked during construction or corroded at a fitting can weep for a year into the fill under the slab before it finds its way up, and only careful location keeps the fix from becoming a jackhammer expedition across the whole floor. When the leak turns out to be under the foundation, that is its own job, which is why we treat slab leaks as a separate, more involved service.

Not every leak is dramatic. A running toilet flapper or a seeping angle stop can waste more water in a month than a burst line does in a day, quietly. That is why the same visit that finds a hidden pipe leak often ends at a toilet or a faucet that has been losing water the whole time.

Water meter dial before leak test, leak detection in Canton, GA — A closer look at water meter dial leak test like this is often what a diagnosis comes down to.

Close up water meter leak indicator, leak detection in Canton, GA — Work on close up water meter leak indicator like this happens out of sight, but it's usually what the whole fix depends on.

Signs worth a call before the drywall gets involved.

None of these on its own is proof, but two together usually mean water is going somewhere it should not:.

A water bill that rose with no change in how the household uses water.
A warm or damp spot on a slab floor, often near a hallway or kitchen.
The faint sound of running water when every fixture is off.
A pressure regulator that hisses, or pressure that feels high at the taps.
Mildew smell in a room that has no obvious water source.

Water leak beneath concrete slab, leak detection in Canton, GA — Water leak concrete slab is exactly the kind of thing that separates a quick visit from a callback in a crawlspace like the ones common around Canton.

Indoor slab trench for sewer replacement, leak detection in Canton, GA — A plumber who knows what to look for spots indoor slab trench sewer replacement in seconds.

Same-day appointments are open across Cherokee County. Call now.

Call (770) 764-0886

Once the spot is marked, the repair depends on what is there. A single bad fitting is a quick correction. A supply line that has failed in one place on an older galvanized system in the Holly Springs or downtown area is often a sign the rest of that run is close behind. It is worth talking about repiping that section rather than returning for the next pinhole. We will tell you which situation you are in before any pipe is cut.

Metal sprinkler pipe leak repair wrap, leak detection in Canton, GA — A closer look at metal sprinkler pipe leak repair wrap like this is often what a diagnosis comes down to in a crawlspace like the ones common around Canton.

Workers repairing leaking crawlspace pipe, leak detection in Canton, GA — A repair to workers repairing leaking crawlspace pipe like this one is sized to the actual damage, not the whole run.

Questions.

Leak Detection questions in Canton.

Not seeing your exact situation below? Call (770) 764-0886 and describe it. A licensed plumber will tell you what is likely going on.

Can you find a leak without breaking anything?

In most cases, yes. Acoustic listening, meter and pressure testing, and thermal reading of a slab let us narrow a leak to a small area without opening walls or floors first. We open only where the evidence points, so the access hole is as small as the repair allows. On a hidden slab line that occasionally means a small, deliberate opening in the floor, but it is targeted, not exploratory.

My water bill jumped but I don't see any water. Is that a leak?

It often is. A supply leak under a slab or behind a wall can run for weeks with no visible sign while it registers on the meter. The quick test is to shut off every fixture and watch the meter: if it still moves, water is leaving the system. Call and we will confirm where.

Do you handle the repair too, or just the detection?

Both. Locating the leak is the hard part; once it is marked, we make the repair or, if the line is failing in more than one place, we talk you through the larger fix before doing anything. You get one company for finding it and fixing it, not a referral to someone else.

Is high water pressure causing my leaks?

It can be a factor. Many newer Canton homes are on a closed system because of a check valve or pressure regulator at the meter, and if that regulator fails, pressure climbs and stresses every fitting in the house. We check static pressure as part of detection, because fixing a leak without fixing the pressure behind it invites the next one.

Talk to a plumber about leak detection in Canton.

Call and describe what is happening. You will reach a plumber, not a form.

CALL A PLUMBER NOW(770) 764-0886

Prefer to talk it through first? Tap here to call (770) 764-0886.

Reviewed by the Canton GA Plumbing Pros team. Plumbing work in Canton follows the Georgia Plumbing Code, which is based on the International Plumbing Code (IPC), along with Cherokee County permit requirements.